The timer is offered with two operating modes:
On/Off Recycling
When power is applied, the output relay energizes for the set “on” time delay period. After this delay has elapsed, the relay de-energizes and remains in this state for the set “off” time delay period. After this period has elapsed, the relay re-energizes and the sequence starts over again and continues to operate like this for as long as the power is applied.
Off/On Recycling
Is the reverse of the above whereby the relay remains de-energized for the set “off” time delay period as soon as power is applied.
Asymmetrical Recycling
Dual Function (On/Off or Off/On)
Multi-voltage (24 - 230VAC/12 to 230V DC)
Multi-time range (0.1s - 100h)
DPDT Relay output
17.5mm wide, DIN Rail mount
| 屬性 | 數值 |
|---|---|
| 電源電壓 | 24 → 230 V ac/12 → 230V 直流 |
| 安裝類型 | DIN 導軌 |
| 觸點數 | 2 |
| 時間范圍 | 0.1 s → 100h |
| 計時器功能數目 | Asymmetrical Recycling ON/OFF or OFF/ON, 多功能 |
| 計時器功能數目 | Asymmetrical Recycling ON/OFF or OFF/ON, 多功能 |
| 觸點配置 | 雙刀雙擲 |
| 時間增量 | 秒 |
| 最大電壓 | 230V 交流/直流 |
| 最大電流 | 8A |
| 系列 | LART/2 |
| 電源 | 外部 |
| 端子類型 | 螺釘 |
| 最小電壓 | 24 V ac / 12V 直流 |
| 深度 | 89mm |
| 開關配置 | DPDT |
| 寬度 | 66.5mm |
| 最高工作溫度 | +60°C |
| 長度 | 17.5mm |
