天天干天天做天天操-天天干天天做天天射-天天干网-天天干网站-天天干网址

The timer is offered with two separate relays. When power is applied, the first relay (Attempts) will energize for the set “on” time delay period, then de-energize for the set “off” time delay period. This is classed as the “first attempt”. The same relay will continue to cycle on and off for the “number of attempts” set on the adjustment. If all the attempts are allowed to run, at the end of the last “on” time delay period, the first relay will de-energize and the second relay (Alarm) will energize and remain in this state. Power must be removed and re-applied to restart the function over again.

Multi Attempt to Start
Designed to limit the number of attempts an engine has to start before providing an alarm
Selectable number of attempts (2-8)
Multi-voltage (12 -48VAC/DC)
Single time range (1 - 60s)
2 x SPDT Relay outputs
17.5mm wide, DIN Rail mount